(1) Reasonable design of tines and precisely adjusted of fork resonant frequency. LSF03 can be used in light powders and flakes with bulk densities as low as 0.008g/cm³.
(2) Particularly suits for level measurement of powdery, fine-grained bulk solids, can effectively avoid buildup.
(3) Industry-leading performance for high temperature industrial environments, can tolerate process temperature up to 250℃.
(4) Strong self-diagnostic function helps to accurately locate the fault.
(5) Easy installation and maintenance free.
(6) Made of strong corrosion resistant material 316L.
(1) EPP and EPS processes in foam molding machines and plastic forming machines.
(2) Zircon sand and petroleum coke.
(3) Ultra-low density particles and powders.
(4) After spraying PTFE on the fork, it is especially suitable for fumed silica level measurement
Housing
Aluminum die-casting housing:ADC-12
Ground terminal:316L
Seal
Seal between housing and housing cover:silicone
Process fitting
Thread:316L
Flange:316L
Probe
Tuning:fork316L
Extension tube:316L
Temperature extension tube:316L
Instrument weight:0.8 ~ 4KG
Measuring frequency approx:140 Hz
Ambient conditions
Ambient temperature on the housing:-40~80℃
Storage and transport temperature:-40~80℃
Process conditions
Process pressure:-1~25bar
Process temperature(Normal temperature):-50~150℃
Process temperature(High temperature) -50~250℃
Sensitivity switch (The lowest density)
High density:≥0.02g/cm³
Low density:≥0.008 g/cm³
Switch Mode
High:overfill protection
Low:dry run protection
Switching delay
When immersed:0.5S
When laid bare:1S
Output :Electronics Relay (DPDT), Two-wire
Operating voltage
Relay:20~253VAC/20 ~ 72VDC
Breaking capacity: Min 50Mw Max 750VA AC, 54W DC Two-wire 10~36VDC
Cable entry/plug
Cable entry M20×1.5,1/2NPT
Plug M20×1.5,1/2NPT
Electrical protective measures
Protection rating:IP66/67
Overvoltage category:III
Protection class
Relay I
Two-wire II