Why-Winters
中文版 Global sites
Categories
120GHz radar level meter
说明及特点:

According to radar theory, range resolution is determined by the bandwidth of the radar signal,  and FMCW radar has a large bandwidth, so it has a high range resolution. 

Because the delay time of the echo signal of the FMCW radar is much less than the time width of  the transmitted signal, the radar transmitter and the receiver can work at the same time, and there is no  distance blind area. 

Under a certain noise power condition, the detection capability of the radar is determined by the  energy of the radar signal. FMCW radar has a large time-band product, much larger than the pulse radar  with the same signal bandwidth and level, so under the same detection capability, FMCW radar has low  transmitting power and is not easy to be intercepted. 

Because the FMCW radar has a large time broadband width product, it does not need a high  peak power, so its operating voltage is relatively low, and it does not need to use high power and high  voltage devices, so that the whole system has a simple structure, small size, light weight and low cost.

应用范围:

The measuring equipment described in this document is used for continuous non-contact level  measurement of liquids, slurries and slurries.

Radar frequency: 120GHz 

Equivalent omnidirectional radiated power: < 10uW 

Measuring range: 0.01 ~ 30m 

Power consumption: < 2.4W 

Power supply: 24VDC, 220VAC, two-wire system/four-wire system 

Display resolution: 0.1mm 

Measurement accuracy: ±1mm, ±3mm Output current: 4 ~ 20mA 

Communication type: RS485, HART 

Process pressure: 0 ~ 2.5MPa, the maximum pressure of the special isolation device can reach  10MPa 

Ambient temperature: -40 ~ +80℃ 

Process temperature: -40℃~+ 80℃, -40℃~+200℃, through the special heat insulation device  temperature can reach 680℃ 

Shell material: cast aluminum 

Protection level: IP66/IP67

Tool