Why-Winters
Double tube probe design, the first in China;
High detection sensitivity, minimum allowable medium density of 0.02g/cm³, suitable for most solid particles;
High temperature design, the process temperature can reach 250℃, and the ultra-high temperature type (gas/water cooling) process temperature can reach 400℃, the industry leading;
Rich self-diagnosis function, can accurately locate fault information;
Effectively prevent hanging, avoid false alarm, simple installation, no need to calibrate;
The use of strong corrosion resistance materials: 316L, 318S13.
LSF04 vibrating bar level switch is suitable for the measurement of granular solid level, such as: PVC, sodium hydroxide, lime, cement, sand, soil, coal, dust, flour, sugar, salt, grain, beans and other materials measurement.
Shell Aluminum :ADC-12
Ground terminal： 316L
Sealing element
Casing and casing cover sea：l silicone
Process connection
Thread ：316L
Flange： 316L
Probe and tube
Probe： 316L
Extension tube： 316L
High temperature extension tube ：316L
Meter weight: 0.8 ~ 4KG
The measurement frequency is about 360 Hz
Environmental condition
The ambient temperature on the shell is -40 ~ 80℃
Storage and transport temperature -40 ~ 80℃
Process condition
Process pressure -1 ~ 16bar
Process temperature (normal temperature type) -50 ~ 150℃
Process temperature (high temperature type) -50 ~ 250℃
Process temperature (ultra-high temperature type) -50 ~ 400℃
Cooling specifications and parameters (for LSF04 ultra High temperature model only)
Cooling inlet pipe 6 x 4 specifications (outer diameter 6mm)PU air pipe
Cooling pressure 0.8Mpa
For details about the minimum cooling gas flow, see 5.4 Minimum Cooling Gas Flow
Sensitivity (minimum measurement density)
High density >0.05 g/cm³
Low density >0.02 g/cm³
High-low conversion mode
High overflow protection
Low dry operation protection
Switching delay
Contact material 0.5s
No material 1s
Output mode
Relay (double pole double throw), two wire system
Operating voltage
Relays 20 ~ 250VAC/20 ~ 72VDC
Switching power
The minimum is 50mW
Max. 750 VA AC,54W DC
Two-wire system 10 ~ 36VDC
Cable inlet/plug
Cable inlet M20×1.5, 1/2NPT
Plug M20×1.5, 1/2NPT
Electrical protection measure
Protection class IP66/67
Overvoltage Class III
Protection class
Relay I
Two-wire II
Explosion-proof certification
Explosion-proof instruments meet the requirements of relevant domestic explosion-proof standards.
Class of protection
The protection level of this instrument can reach the IP66/67 standard
